Os photovoltaic modules are essential for the functioning of a solar energy system. Through solar s, it is possible to capture solar radiation and convert it into electrical energy. However, there are doubts about how these products should be stored. So, Canal Solar brings recommendations from experts and manufacturers on how to store modules and ensure their quality.
The solar module is made of robust materials that offer high resistance to degradation caused by exposure to external environments, allowing the product to have an average useful life of 25 years. Storage of photovoltaic modules
According to the BYD manual, the following guidelines must be followed when handling the product:
- Modules must be stored in BYD packaging;
- Using the original packaging, the permitted stacking is 1 unit with up to 28 modules;
- It is necessary to keep the packaging positioned horizontally, in flat and covered places – to protect against adverse weather conditions;
- After removing the modules from the packaging, they must be kept in a safe, dry, ventilated place and keep the MC4 connectors connected;
- Avoid impacts or direct presence of sunlight or artificial light.
BYD also recommends using a maximum of 28 modules in static stacking. In this process, it is necessary to maintain alignment and use spacer foam between the products. Jinko, in its manual, recommends that the modules be stored in their packaging and in a cool, dry place with the ground leveled at an angle of less than 10°. They also emphasize that items should not be placed on top of the modules or boxes, as shown in the example:
According to Jinko, after disassembly, it is recommended that the modules remain stacked on a single and that there is a minimum distance of 30 cm between the packages, as shown in the image below:
Canadian Solar does not recommend allowing children into the module storage area, and states that a controlled environment is required for storage purposes for a period of less than three months. Connectors must be given extra protection to prevent them from coming into with moisture and sunlight, and the units must not be stacked more than 12 high and must be horizontal, the manufacturer states.
According to Canadian Solar, the s must be properly aligned and the boxes can be stacked up to two units high, as long as they are placed horizontally. If they are placed vertically, they cannot be stacked, as illustrated in the figure below:
The storage of these products varies depending on each company. Therefore, it is advisable to read the manual offered by the manufacturer and take the necessary precautions to preserve the quality and effectiveness of your module.
